AquaArm Hackaid P | MYK Arment Hackaid | Hackaid P | Hack Aid P |Hackaid Plast | Super Hack for Plaster work in Pune and Pimpri Chichwad | Looking for AquaArm Hackaid P Plastering chemical in Pune & Pimpri Chinchwad you are at right place known as Elite Infra. Contact 82087 39490
AquaArm Hackaid P is a unique single pack polymeric solution that strengthens the bond Product Description ReArm Hack Aid P is a unique single pack polymeric solution that strengthens the bond between plaster and new and old concrete effectively.
Uses :
• Bond between concrete and plaster.
• Bond between concrete and ceramic.
Features and Benefits:
• Economical as compared to Epoxy based product.
• ReArm Hack Aid P holds the concrete tightly due to interaction polymerization.
• As the concrete cures, the bond strength increases.
• No hacking is required before plaster application.
• Excellent interfacial bonding between old and new concrete.
• Excellent bonding between masonry and subsequent layer of plasters.
• Non-ionic, hence no possibility of attack on concrete by chlorides, alkalis, sulphates, etc.
• It does not have any corroding or deteriorating effect on the reinforcement steel.
• The bond between steel and concrete is also preserved by ReArm Hack Aid P
• Laboratory tests reveal that the force required to pull out ReArm Hack Aid P aided plaster is twice the force required to detach ordinary plaster.
• In many repair cases gunniting does not last due to inadequate bond. This may be easily remedied by ReArm Hack Aid P.
• Reduces the rebound loss.
Application Methodology :
• Clean the surface with water jet thoroughly to remove dirt, loose, particles etc.,
• Moisten the surface with water.
• On the entire clean moist surface, apply a coat of ReArm Hack Aid P by spray or brush.
• Tacky period is approximately 15 to 120 minutes may vary depending on external atmospheric
conditions, saturation degree of substrate etc.
• Check and ensure that the surface is tacky prior to application.
• Prior to using for tile application, the surface of the tile needs to be roughened a little bit for better adhesion.
• Care should be taken that no area remains without application of ReArm Hack Aid P.
