Dr. Fixit Roof Seal Classic New | Acrylic Elastomeric Coating | Roof top coat on brick bat Coba. | Waterproof coat on screeds | China or Mosiac tiles | roof top waterproofing chemical in Pune & Pimpri Chinchwad you are at right place known as Elite Infra. Contact 82087 39490
Description:
Dr. Fixit Roofseal Classic New is a single-component, elastomeric waterproof coating designed for roofs for top coat application. It combines waterproofing and heat insulation in one application, utilizing Acrylate PU hybrid emulsion technology and reinforced with nano fibers for superior performance.
Standard Compliance:
Specification Meets ASTM D6083 - Type II standard specification
Areas of Application:
Existing flat or sloped roof surfaces such as:
Brickbat coba finishes.
Cement mortar screeds
China mosaic tiles
Clay Tiles
Ceramic Tiles.
Features & Benefits:
Protection: Provides exceptional waterproofing and reduces surface temperature by up to 10°C in peak summer.
Flexible & Crack Bridging: The highly flexible formula bridges crack up to 2 mm, offering long -lasting protection.
Durable Coating: Perfect for roofs with light foot traffic.
Easy Application: Single-component, self -priming, ready-to-use waterproof coating.3
Eco-Friendly Choice: Non-toxic and VOC-compliant water-based coating for a sustainable solution.
Warranty: 10 years waterproofing. Method of Application SURFACE PREPARATION
Roof substrates must be pressure-washed with water jet having a minimum pressure of 1, 400 psi to be used to remove all dirt, dust, chalking and waste products.
When encountering roof substrates that have living organisms such as algae, mold or fungus, should be clean with 3:1 bleach or bio wash solution shall be used to kill and remove these organisms during the roof cleaning.
Freshly laid cement sand concrete screed should be designed greater than 80 mm thickness and 50mm at the end slope, using waterproofing additives in concrete screed will reduce the shrinkage potential. The concrete curing takes about 8 weeks to be fully cured before application of Topcoat coating.
Ensure the roof slope is at least 1 in 80 or 1 in 100, as per the specified requirements.
Thoroughly inspect the terrace roof for cracks, blisters, ponding, exposed foam, and open seams. Evaluate the de bonding of screeds or tiles on the terrace roof by tapping with a nylon hammer. Give special attention to areas around roof penetrations, ponding spots, and parapet wall cracks.
Remove concrete screed, brickbat coba, China mosaic, or ceramic tiles if they are found to be deboned by more than 30% from the roof substrate during a hammer test. Proceed to reach up to the base slab level for fresh waterproofing as necessary.
Ensure there is a 1 water drain outlet of a minimum of 100 mm Dia for 500 Sq. ft. surface area and gaps around pipe inserts should be sealed properly with polymer modified mortar.
Stagnant water caused by undulations in the roof surface should be identified and repaired using Polymer -Modified Mortar (PMM).
All joints / corners / rainwater outlets, marble / tile strip joints should be grouted with PMM.
Ensure that all penetration points, mechanical equipment, HVAC & solar panels are suitably placed on the upstands.
Description:
Dr. Fixit Roofseal Classic New is a single-component, elastomeric waterproof coating designed for roofs for top coat application. It combines waterproofing and heat insulation in one application, utilizing Acrylate PU hybrid emulsion technology and reinforced with nano fibers for superior performance.
Standard Compliance:
Specification Meets ASTM D6083 - Type II standard specification
Areas of Application:
Existing flat or sloped roof surfaces such as:
Brickbat coba finishes.
Cement mortar screeds
China mosaic tiles
Clay Tiles
Ceramic Tiles.
Features & Benefits:
Protection: Provides exceptional waterproofing and reduces surface temperature by up to 10°C in peak summer.
Flexible & Crack Bridging: The highly flexible formula bridges crack up to 2 mm, offering long -lasting protection.
Durable Coating: Perfect for roofs with light foot traffic.
Easy Application: Single-component, self -priming, ready-to-use waterproof coating.3
Eco-Friendly Choice: Non-toxic and VOC-compliant water-based coating for a sustainable solution.
Warranty: 10 years waterproofing. Method of Application SURFACE PREPARATION
Roof substrates must be pressure-washed with water jet having a minimum pressure of 1, 400 psi to be used to remove all dirt, dust, chalking and waste products.
When encountering roof substrates that have living organisms such as algae, mold or fungus, should be clean with 3:1 bleach or bio wash solution shall be used to kill and remove these organisms during the roof cleaning.
Freshly laid cement sand concrete screed should be designed greater than 80 mm thickness and 50mm at the end slope, using waterproofing additives in concrete screed will reduce the shrinkage potential. The concrete curing takes about 8 weeks to be fully cured before application of Topcoat coating.
Ensure the roof slope is at least 1 in 80 or 1 in 100, as per the specified requirements.
Thoroughly inspect the terrace roof for cracks, blisters, ponding, exposed foam, and open seams. Evaluate the de bonding of screeds or tiles on the terrace roof by tapping with a nylon hammer. Give special attention to areas around roof penetrations, ponding spots, and parapet wall cracks.
Remove concrete screed, brickbat coba, China mosaic, or ceramic tiles if they are found to be deboned by more than 30% from the roof substrate during a hammer test. Proceed to reach up to the base slab level for fresh waterproofing as necessary.
Ensure there is a 1 water drain outlet of a minimum of 100 mm Dia for 500 Sq. ft. surface area and gaps around pipe inserts should be sealed properly with polymer modified mortar.
Stagnant water caused by undulations in the roof surface should be identified and repaired using Polymer -Modified Mortar (PMM).
All joints / corners / rainwater outlets, marble / tile strip joints should be grouted with PMM.
Ensure that all penetration points, mechanical equipment, HVAC & solar panels are suitably placed on the upstands.
Keywords
