Elite Fiber Mesh |PP Fiber mesh|45 GSM PP Fiber mesh|Fiber mesh for water proofing | Looking for high-quality Fiber mesh? Mesh is made of PP Fiber for high mechanical strength in order to reinforce the sand and gypsum plaster. In addition to this High grade pure latex is used to provide higher tensile strength in areas prone to cracks like Joints between two differential substrates like beam to brick wall Electrical conduits, plumbing and other con-shield areas. Fiber mesh is a ready-to-use mesh which is thin, strong and flexible alkali resistant for embedment with waterproofing and crack-isolation membrane on both the residential and commercial floors & walls of sunk portions and top roof terrace. Fiber Mesh improves the performance of building near water bodies when applied over cracks, coves and corners, and around drains. Advantages : Durable and flexible Easy embedment Easy in installation Ready to use Easy to cut with knife or scissors Process of application : After applying first layer of waterproofing as per the equirements by using appropriate equipment. Lying of the net over the first coat of the application done, positioning it in the vertical or horizontal directions and overlapping the joints by at least 1 inch. Level the surface properly It is advisable to add strips of net sloping at 45° on a level with windows and door openings. If waterproofing integrity is required in expansion and control joints net strip can be bond on two sides of joint and seal it.