Product Description:
It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them
waterproof. The coating is UV stable and highly reflective with high flexibility.
It is used for waterproofing of all types of RCC
surfaces such as roofs chajjas, Parapet walls and
external walls.
Asbestos cement sheets roofs can also be
waterproofed using scrim cloth or Aso Joint Tape at
the junctions overlaps and J - bolts as
reinforcement.
As a damp proof course applied under the first layer
of bricks or blocks in masonry works.
For Top Coating: Two Coats are recommended. When the
primer coat is touch dry apply the first coat of AquaArm
Right Coat. The second coat is to be applied
perpendicular to the first coat within one hour or when the
first coat is tack free, to ensure uniform masking & even
finish. Do not undertake any further work over the coated area
within 72 hrs of final coat. Allow the coated surface to air cure fully for 7 days.
Note:
Protect the painted surface from rain or dust at least for 8
hours. When rain is expected, do not initiate the
application.
Step no 1: Surface Preparation
The concrete surfaces should be thoroughly cleaned and
free from laitance, dust, dried algae, loose material, oil,
grease, etc. Old/repainted surfaces must be thoroughly
cleaned by mechanical means such as wire brushing
and/or by high pressure water jet cleaning.
All surface cracks more than 2 mm and up to 5 mm
width should be filled with Crack Filling Compound or
ReArm Crack Fill paste/powder as appropriate. Cracks
more than 5 mm and all separation gaps should be filled
with Rearm Bond Latex modified mortar or as specified
after opening the crack to a “V” cut.
Step no 2: Priming
For Primer dilute one part by volume of AquaArm Right
Coatwith one part of clean water and apply with a brush
evenly on the surface.
Step No. 3: Application of AquaArm Right Coat
Use AquaArm Right Coat directly from the container. Stir
contents well before use.
Uses
Application Methodology
Ver/5/Dec 2019
It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make them
waterproof. The coating is UV stable and highly reflective with high flexibility.
Product Description
W a t e r p r o o f i n g S y s t e m s
Features & Benefits
UV Stable hence can be used for external application
Seamless application
Single component and easily brush applied
Breathable
Cures to give a permanently flexible and resilient
surface resistant to a wide range of temperatures
Mechanical damages to the membrane can easily be
repaired by spot application
No cleaning solvents are 'required and can be washed
off with water when it is still wet.
